Vortex-Genie 1™

• Violent single high-speed vortexing
• Easy “Touch-On” operation
• 6 mm orbit
• May be used in cold rooms and incubators
• Made in the USA

The compact Vortex-Genie 1 has a more intense vortexing action than any other vortex mixer at an economical price.  Modeled after the original Vortex-Genie, the large, 6 mm orbit generates violent mixing suitable for any sample type. Single, high-speed touch mixing provides reproducibility and eliminates operator variability.

The Vortex-Genie 1 is supplied with a pop-off cup for use with tubes.

Vortex-Genie 2™

• Short, rapid, eccentric stroke of motor-driven head imparts either vortex motions or shaking action to vessels held in or against it
• Rheostat knob permits selection of gentle to vigorous shaking or low- to high-speed vortex action
• Control switch has positions Off and On, which produces continuous head motion, and touch, which causes the head to stop automatically when vessel is removed
• May be used in cold rooms and incubators
• Made in the USA

Includes two heads: one rubber-topped platform head, 76 mm diameter, for general purpose use with tubes, flasks, beakers, etc. and one cup head, 25 mm i.d. x 22 mm deep, for single test tubes and other small vessels. Heads are interchangeable and snap in place without use of tools. For additional mixing heads, see 8294D35 series. Housing is coated cast iron, 156 x 121 x 165 mm high, with rubber feet.

Shaker has 3-wire cord and plug for 120 volts, 60 Hz. 8294D21 shaker is for 240 volts, 50 Hz; with 3-wire cord, but cord is without plug. ETL and CE listed.

Vortex-Genie 2T™

The Vortex-Genie 2T incorporates the precise and reliable mixing action of the Vortex-Genie 2 with an integrated timer for increased convenience. Continuous mode operates from 1-60 minutes, and “Touch On” mode operates from 1-60 seconds. Untimed operation is also available. Variable speed control allows precise mixing from gentle shaking to vigorous vortexing. May be used in cold rooms and incubators. Made in the USA.

The Vortex-Genie 2T is supplied with a pop-off cup and 3-inch (76mm) platform. Additional accessories are available to accommodate a range of vessels including microtubes and microplates.

Digital Vortex-Genie 2™

Same great features as Vortex-Genie 2, but with a digital control and display of speed and time

• Digital display provides accuracy, reproducibility and repeatability
• Timer - Touch On: 1-99 seconds
• Timer - Hands-Free: 1-99 minutes or continuous
• May be used in cold rooms and incubators
• Made in the USA

DIGITAL VORTEX-GENIE® 2 MIXER FOR APPLIED BIOSYSTEMS

Digital Control and Display of Speed & Time

This is a specially configured Digital Vortex-Genie 2 Mixer for Applied Biosystems Microplate Protocols ONLY. Includes specially designed adaptor. Does not include 3-inch Platform and Pop-off Cup.

• Variable speed control allows slow shaking up to high vortexing.
• Digital display provides accuracy, reproducibility and repeatability.
• Incorporates timer function or operates in continuous mode.
• May be used in cold rooms or incubators

• Tube Holder holds twenty-four microtubes horizontally.
• Holder snaps on to any Vortex-Genie 2 mixer and the Vortex-Genie Pulse.
• No additional attachment necessary.

• 2nd Tier Platform doubles your shaking capacity.
• Easily attached and secured without any tools.
• For use on the Mini-300 Orbital-Genies or any Genie Temp-Shaker models with Adhering Mat Platform or Flask Clamp Platform.